Vizard used strong magnets on some kind of rods to lift the followers clear of
the cam. B He held them clear with clothes pins. B There is a picture in his
book somewhere in the discussion of cams. B Although the engine was on a
dyno,there's no reason you can't use the same approach in the car.
Hal
Sent via the Samsung Galaxy SB. 5 ACTIVEb", an AT&T 4G LTE smartphone
-------- Original message --------
From: corvallis@peoplepc.com
Date:08/01/2014 6:08 PM (GMT-08:00)
To: spridgets@autox.team.net
Cc:
Subject: Re: [Spridgets] Cam removal on 1275 in car
http://www.theminiforum.co.uk/forums/topic/192399-removing-camshaft-with-eng
ine-in-situ-1275/
I googled...
remove 1275 camshaft engine in the car?
There may be more answere further down the list. Bill in Oregon
==========================================================================
-----Original Message-----
From: Spridgets [mailto:spridgets-bounces@autox.team.net] On Behalf Of
Lester
Sent: Friday, August 01, 2014 6:01 PM
To: Spridgets list; bugeye@yahoogroups.com
Subject: [Spridgets] Cam removal on 1275 in car
Hello all,
is it possible to remove the camshaft on a 1275 with the engine in the car?
Is it remove the head and pull the followers out the top or does the engine
have to come out?
Lester
.. don't ask.
------------------------
------------------------
spridgets@autox.team.net
Archive: http://www.team.net/archive
------------------------
spridgets@autox.team.net
Archive: http://www.team.net/archive
|