spridgets
[Top] [All Lists]

Re: [Spridgets] rear suspension rubber bushing replacement

To: spridgets <spridgets@autox.team.net>
Subject: Re: [Spridgets] rear suspension rubber bushing replacement
From: ryan.kubanoff@comcast.net
Date: Mon, 14 Nov 2011 22:45:10 +0000 (UTC)
A little dremel to slightly open the hole.B  place on fitting. add 2ml of
acetone. wait 4 seconds push. done.B  flush with water. lower car. go for a
ride. on to next project.

Ryan



----- Original Message -----


From: "ryan kubanoff" <ryan.kubanoff@comcast.net>
To: "spridgets" <spridgets@autox.team.net>
Sent: Monday, November 14, 2011 1:11:01 PM
Subject: [Spridgets] rear suspension rubber bushing replacement

While under the car replacing my fuel pump I noticed the rubber rebound bumper
on the rear ssuspension was in two pieces.B B I have a spare set but how do i
replace them?B B

Ryan
Suggested annual donation B $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/spridgets/ryan.kubanoff@comcast.net
_______________________________________________

Donate: http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

<Prev in Thread] Current Thread [Next in Thread>