alan,
which kellison do you have the mold for? the one i have here is a race
version the had no provisions for attachment to hood hinges nor any
reinforcement at rear to keep it's shape at the cowel. it's very "flimsy and
very light weight (thin) , strictly a hood pin in place piece. i was going
to glass in a rear reinforcement from a bugeye for attachment and to get it to
keep it's shape at the cowel end.
also did kellison ever offer a grill? i made one for mine.
chuck
--- On Fri, 11/4/11, alan <frogeye@cox.net> wrote:
From: alan <frogeye@cox.net>
Subject: [Spridgets] Fiberglass bonnets
To: "list" <spridgets@autox.team.net>
Date: Friday, November 4, 2011, 7:40 PM
That glass bonnet is a Kellison bonnet
If anyone is really interested in one I have the mold here in Rhode island
and
if therebs enough interest would be willing to have a few fabricated
locally
I had 6 already made and since then sold all 6 off
Contact me off list if you need more details
Alan
frogeye@cox.net
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/spridgets/crusaderchuck@yahoo.com
_______________________________________________
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|