If you send Todd Clarke your old plate he will make one up for you. He
wants the old plate to prevent more than one car running around out
there with the same number....good for Todd!
You will get your original plate returned.
http://www.clarkespares.com/
Dave W.
On 11/5/2011 5:37 PM, HealeyRick wrote:
> Removing the rivets is easy. Use a hacksaw blade to cut a slot in the head.
> They just unscrew from there. I think Clarke Spares may have replacements.
> Sorry, can't help with the ID plate.
>
> Rick
>
>
> Follow My Nasty Boy Build: http://tinyurl.com/yj52fwo
>
> --- On Sat, 11/5/11, Dave KK7SS<kk7ss@frontier.com> wrote:
>
> From: Dave KK7SS<kk7ss@frontier.com>
> Subject: [Spridgets] Engine ID tag..
> To: "spridgets_autox.team.net"<spridgets@autox.team.net>
> Date: Saturday, November 5, 2011, 4:54 PM
>
> Where can I get a new engine ID tag made, and get two of those rivets.
> How do I get the old rivet bottoms out of the block?
> If I drill then I widen the hole, yes?
>
> Thanks///
>
> --
> Dave G KK7SS
> Richland, WA
>
> '59 Morris Minor 1000 - working on it :|
> '65 Sprite - running :)
> '76 Midget - co-owned with #4 Son :)
> '06 Honda Civic Hybrid
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/spridgets/healeyrick@yahoo.com
> _______________________________________________
>
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
>http://autox.team.net/mailman/options/spridgets/dwoerpel@wi.net
_______________________________________________
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|