On 12/3/2010 6:00 PM, Jess Power wrote:
> Just started a supposedly rebuilt 1275cc motor and it began reving to
> about 4000 RPMs and then seized with a loud clanking sound. Now it
> appears to be frozen.Broken rod?Any thoughts?
Couple of things, I had this exact thing happen last year.
I popped out the starter and pried the flywheel over and all was fine.
The engine still runs. Something, I still don't know what must have come
loose or was left in the bell housing and jammed the flywheel.
the car was on it's first drive, about 2 blocks from home.
Did the distributor pop out? That makes a hell of a noise and back fires.
Are you sure the fan belt was on the bottom pulley? Again, I thought it
was and it managed to wedge itself and stall the motor as I was looking
for a reason why the fan was not turning.
At least those are the easy answers, the ones you want to hear.
Other than that, something broke inside or the clutch disintegrated.
--
Frank Clarici
Toms River, NJ
_______________________________________________
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|