Lin...
Starter only needs to move straight out less than a full inch so dip stick
tube shouldn't interfere. Here is really nothing in there to hang up that I
can think of... Maybe tap it a few times with a soft mallet as you pull it
forward? Try rocking it a bit as you pull?
Cheers!!
Jim
On Sun, Oct 3, 2010 at 1:41 PM, <corvallis@peoplepc.com> wrote:
> Your post made it, and I don't know the answer. .bill in corvallis
>
>
>
> "List,
>
> I got both bolts out (I see that tricky spot needed under the passengers
>
> side access Frank) but I can seem to get the starter completely out. I had
>
> it in gear then out of gear and it is hanging up on the very end. Does it
>
> need to come streight out therefore needing to remove the oil filer? (I
> have
>
> the 1275 motor) or is there another way? Should I have someone press on the
>
> clutch?
>
>
>
> Lin"
>
> _____
>
> From: Linda Grunthaner [mailto:grunthaner@gmail.com]
> Sent: Sunday, October 03, 2010 10:22 AM
> To: corvallis@peoplepc.com
> Subject: Re: 10am Sunday
>
>
>
> I don't see my post on the list do you know if I need to remove the oil
> filter to get the starter completly out it is hung up at the end.
> lin
> _______________________________________________
>
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage <http://www.team.net/forums%0AUnsubscribe/Manage>:
> http://autox.team.net/mailman/options/spridgets/bmwwxman@gmail.com
>
>
--
Cheers!!
Jim
"The problems that exist in the world today cannot be solved by the level of
thinking that
created them."-Albert Einstein
_______________________________________________
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|