It would be really easy to weld up the holes that the peddles swing from (in
the peddle box) and redrill then 1/4" closer to the driver, that would move
the peddles almost 2" closer to the driver.
BillM
> From: WeslakeMonza1330@aol.com
> Date: Mon, 26 Apr 2010 12:43:43 -0400
> To: billyzoom@billyzoom.com; spridgets@autox.team.net
> Subject: Re: [Spridgets] Pedal box modifications
>
> It's a racing seat and while it can go an inch further back my foot reach
> will then be an inch too short.
>
> In a message dated 25/04/2010 22:27:03 GMT Daylight Time,
> billyzoom@billyzoom.com writes:
>
> > would allow the seat to go further
> > back and thereby allow a straighter arm position.
> You don't normally have it all the way back?
> _______________________________________________
>
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/spridgets/billmasq@hotmail.com
>
_________________________________________________________________
Hotmail is redefining busy with tools for the New Busy. Get more from your
inbox.
http://www.windowslive.com/campaign/thenewbusy?ocid=PID28326::T:WLMTAGL:ON:WL
:en-US:WM_HMP:042010_2
_______________________________________________
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|