Thanks - One more question - whats the correct length of of the slave
pushrod from center of the hole to the end of the rod? Of interest for
a '73...
Peter Caldwell wrote:
> Easier and safer for the line is to fill the MC completely, stretch a
> plastic bag over the mouth and tighten cap back on. You have now "put
> your thumb on the straw" and fluid wont leak.... much. The install
> slave, open bleeder and walk away whilst imbibing a beer. It'll be
> bled by the time your done with your second.
>
> Peter C
> =====
>
> At 11:44 AM 6/25/2009, Marc wrote:
>> I want to change a slave cylinder - Can I clamp the hose to prevent
>> losing all the fluid without damage to the hose?
>>
>> --
>>
>> Marc
--
Marc
_______________________________________________
Support Team.Net http://www.team.net/donate.html
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/spridgets
|