My turn-signal-off wings are tired and don't always work, so I thought I would
put a door buzzer in the circuit. The obvious place is at the turn signal
flasher unit, which is easily accessible. There is not enough power to run
both the flasher and the buzzer at the same time, either in series or in
parallel. That really seems strange, since there is a lot of power going to
the lights and they stay on without blinking when the buzzer is in parallel.
Any recommendations on how to wire such a buzzer? Maybe one that is less
consumptive of power in parallel?
Michael Rowe
'74 Midget
Long Island, NY
_______________________________________________
Support Team.Net http://www.team.net/donate.html
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/spridgets
|