50F is most likely the lowest. There should be a temp. range on the product
data sheet. As the temps change you need to use a different reducer. The
product data sheet is what you should follow.
-g
On Mon, Oct 27, 2008 at 1:23 PM, EXT-Love, Charles M <
Charles.M.Love2@boeing.com> wrote:
> What is the coldest air temperature you can have to paint you car and get a
> good paint job?
>
> Who is the recommended source for Dual Brake Master Cylinder rebuild?
>
> Thanks,
>
> Monty Love
> 1973 Midget in Pieces, ready for paint...
> Huntsville, Alabama
>
> The greatest revolutions come not by the discovery of something new. They
> happen when someone radically changes or challenges what was always there.
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> You are subscribed as wmgilroy@gmail.com
>
> http://www.team.net/archive
>
> http://autox.team.net/mailman/listinfo/spridgets
_______________________________________________
Support Team.Net http://www.team.net/donate.html
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/spridgets
|