Hello Phil,
from the ignition (white) to positive, (CB if you're using a
stock coil) White/Black from coil negative to the dizzy (SW,
again if using a stock coil)
it'll get confusing because the LUCAS coil is marked SW for
SWITCH (ignition switch) and CB for CONTACT BREAKER (points)
instead of NEGATIVE and POSITVE respectively. .. CB should + ans
SW should be - so when changed to negative ground the coil
markings are now backwards.
--
Best regards,
Bill L. mailto:pythias@pacifier.com
'66 Sprite MKIII HAN8L49403 "the red thing"
Individualists unite!
_______________________________________________
Support Team.Net http://www.team.net/donate.html
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/spridgets
|