Thank you chris! 6.5in total! Perfect! thank you!
For the others:
I have a 1275cc. I dont know the exact cap. I was told 5quarts but he wasnt
sure, I have a winners circle blue oil pan and I have an oilcooler.
On Sat, Sep 13, 2008 at 8:12 PM, Chris Manuel <cmanuel@wi.rr.com> wrote:
> On my 66 1098, the tube is about 1.25 inches, and the max point measurement
> is about 7.75 inches.
>
> Chris
> -----Original Message-----
> From: spridgets-bounces+cmanuel=wi.rr.com@autox.team.net
> [mailto:spridgets-bounces+cmanuel <spridgets-bounces%2Bcmanuel>=wi.rr.com@
> autox.team.net] On Behalf Of
> Matt Hagopian
> Sent: Saturday, September 13, 2008 4:53 PM
> To: Billy Zoom
> Cc: spridgets Spridgets@autox.team. Net
> Subject: Re: [Spridgets] oil dipstick
>
> Could someone please take a measuement from the block to the top of the
> dipstick tube and from the point that the dipstick touches the tube to the
> max point. Thank you! ps. I ordered a dipstick tube but it wont be here
> until after my race, thats why i am asking for these 2 measurements
>
> On Sat, Sep 13, 2008 at 2:15 AM, Billy Zoom <billyzoom@billyzoom.com>
> wrote:
>
> > I think you're supposed to change the plastic tube when you change the
> > filter. Some of the Mini places sell metal ones.
> >
> >
> >
>
>
> --
> Sincerely,
>
>
> Matt Hagopian
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> You are subscribed as cmanuel@wi.rr.com
>
> http://www.team.net/archive
>
> http://autox.team.net/mailman/listinfo/spridgets
>
>
>
--
Sincerely,
Matt Hagopian
_______________________________________________
Support Team.Net http://www.team.net/donate.html
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/spridgets
|