Thanks for the help guys, I have found out from Peter C. that they did
have different bores.
mike
Mike Rambour wrote:
> Does anyone have a 100-4 brake master cylinder that they could take
> some measurements for me ? or better yet close by so I can compare ?
>
> I know there is a big healey list but I am on too many lists already so
> thought I would ask here before joining another list.
>
> One of our members needs a master cylinder for his Singer and the 100-4
> cylinder looks identical but there is some discussion if the piston size
> is the same. I am talking about part 7-076 on this page
> http://www.victoriabritish.com/Features/AH/AHBR1.htm.
>
> I have seen the 2 together and I know the bolt holes are easily with a
> 1/4" of each other, I could not compare that closely but its close, its
> just the internal diameter that is the concern.
>
> mike
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> You are subscribed as mikey@b2systems.com
>
> http://www.team.net/archive
>
> http://autox.team.net/mailman/listinfo/spridgets
_______________________________________________
Support Team.Net http://www.team.net/donate.html
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/spridgets
|