My carbs are the same numbers but they are different.
My rear carb is 1/8 thinner than the front one. It seems to be in the flange
that bolts to the intake manifold.
This does not allow the shafts to line up and in fact causes them to bind a
bit down at the idle position.
Tomorrow I will add a couple of gaskets to align them and then see how the
idle works with out that bind.
Comments?
_______________________________________________
Support Team.Net http://www.team.net/donate.html
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/spridgets
|