spridgets
[Top] [All Lists]

Re: [Spridgets] Bugeye door interior covers

To: "Biff Jones" <biffjones@verizon.net>, "'Spridgets'"
Subject: Re: [Spridgets] Bugeye door interior covers
From: "Dean Hedin" <dlh2001@comcast.net>
Date: Mon, 7 Jul 2008 23:02:53 -0400
Hey Biff..

What about this...?
http://rubbercal.com/Z_Grip_Photo.html

I believe it is about 6 ribs per inch...assuming I have done my 
geometry/measurements correct..


----- Original Message ----- 
From: "Biff Jones" <biffjones@verizon.net>
Subject: Re: [Spridgets] Bugeye door interior covers


>I have a few pieces of original door liner material and it has 6 "ribs" per
> inch, not 9.
> And while the stuff you can buy has square ribs the original material has
> round top ribs with the lowest points being an acute angle.
> It's hard to describe but sorta of like an upside down U's connected with
> V's .
_______________________________________________
Support Team.Net  http://www.team.net/donate.html


http://www.team.net/archive

http://autox.team.net/mailman/listinfo/spridgets

<Prev in Thread] Current Thread [Next in Thread>