Use a bit of water soluble lube on the hose and it wil slip on easily.
--- On Wed, 6/25/08, Mike/Donna Carpenter <mail4carpenters@peoplepc.com>
wrote:
From: Mike/Donna Carpenter <mail4carpenters@peoplepc.com>
Subject: Re: [Spridgets] ByPass Hose
You can simply use a piece of 1/2 inch diam. inner hole heater hose or fuel
line. Make it a tiny bit shorter than the space where it will be and kink it
in the middle while putting it on. You should not have to remove much of
anything.
Mike C
>
>I'm faced with the task or replacing a leaking water bypass hose on my
BE.
>It's a small hose about 2" long that goes between the water pump
and the front
>end on the head. Has anyone done this? Do I need to remove the water pump
or
>is there some easy way to replace it?
_______________________________________________
Support Team.Net http://www.team.net/donate.html
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/spridgets
|