spridgets
[Top] [All Lists]

Re: [Spridgets] octane needs for 2006 Mini Cooper S

To: <JNBrashear@garverengineers.com>, <spridgets@autox.team.net>,
Subject: Re: [Spridgets] octane needs for 2006 Mini Cooper S
From: "MICHAEL CARPENTER" <MAIL4CARPENTERS@peoplepc.com>
Date: Mon, 23 Jun 2008 21:28:28 -0400
As I stated.  You should follow the owners manual on what octane to use.

Mike C
  ----- Original Message -----
  From: miniac7@aol.com
  To: mail4carpenters@peoplepc.com ; JNBrashear@garverengineers.com ;
spridgets@autox.team.net ; healeys@autox.team.net
  Sent: Monday, June 23, 2008 3:40 PM
  Subject: Re: [Spridgets] octane needs for 2006 Mini Cooper S


  Page 99 of the owners manual for my '06 MCS indicates a minimum of 91 octane
being required. Being a a firm believer in following manufacturer's
recommendations, especially on a new car under warranty, I've used nothing but
91 in mine....but that's just me.

  Howard Collins
  Virginia Beach, VA.


  -----Original Message-----
  From: Mike/Donna Carpenter <mail4carpenters@peoplepc.com>
  To: Brashear,Jack,N <JNBrashear@garverengineers.com>; Spridgets
<spridgets@autox.team.net>; HealeyMail List <healeys@autox.team.net>
  Sent: Mon, 23 Jun 2008 2:25 pm
  Subject: Re: [Spridgets] octane needs for 2006 Mini Cooper S


They are throwing money out their tail-pipe most likely if they use the higher
grade.  Take a look at your owners manual and if it says to run 87, then that
is
all that you need.

Mike C

-----Original Message-----
>From: "Brashear, Jack, N" <JNBrashear@garverengineers.com>
>Sent: Jun 23, 2008 2:12 PM
>To: Spridgets <spridgets@autox.team.net>, HealeyMail List
<healeys@autox.team.net>
>Subject: [Spridgets] octane needs for 2006 Mini Cooper S
>
>Hi All.  I bought a 2006 MC S automatic when it had 10,300 miles on it.
>Now it has nearly 20 grand.  The PO said she had always used 87 octane
>with no problems.  Soooo, I have continued using 87 octane with no
>apparent problems.  Recently I've had folks tell me to use 91+ octane.
>Why??  Am I damaging anything by using the lower (and cheaper) 87
>octane??  Thanks for your feedback.
>
>Jack Brashear, PE
>Project Manager /  Water
>
>Garver Engineers
>Office: 501-376-3633 Ext. 402
>Mobile: 501-352-8890
>E-mail: jnbrashear@garverengineers.com
>_______________________________________________
>

________________________________________
_______________________________________________
Support Team.Net  http://www.team.net/donate.html


http://www.team.net/archive

http://autox.team.net/mailman/listinfo/spridgets

<Prev in Thread] Current Thread [Next in Thread>