Re: [Spridgets] Question re. Torque wrench with extension

["Geoff Branch" <gjbranch@comcast.net>]

That won't change the setting, as long as you can ensure that it stays 
straight up and down, ie parrellel with the bolt.


----- Original Message ----- 
From: "Dave G." <dmg@bossig.com>
To: <spridgets@autox.team.net>
Sent: Saturday, June 14, 2008 2:43 PM
Subject: Re: [Spridgets] Question re. Torque wrench with extension


>I should add... I'm not talking about adding a cheater bar on the end, but
> adding an extension in-line with the socket to get to a hard to reach 
> nut...
>
> I know that increasing the length of the bar alters the torque...  there 
> is a
> little windows applet for calcualting that one...
_______________________________________________
Support Team.Net  http://www.team.net/donate.html


http://www.team.net/archive

http://autox.team.net/mailman/listinfo/spridgets