You cant swap the circuit can you? You can swap the jets / emulsion
tubes but the circuit is the machining in the body of the carb plus
the jets etc. unless DCOE's are that different..
Lester
On Jun 1, 2008, at 10:30 PM, Ron Soave wrote:
> --- Lester <oldsaabguy@comcast.net> wrote:
>> I would put money on the fact that you have caca in
>> the idle circuit
>> or that the idle jet is clogged.
>
> Lester,
> Thanks. I had the same guess earlier today - the
> circuit is clean. I have the same exact idle circuit
> on my race car's weber, and I swapped it without
> effect. I agree I'm not on the idle circuit. There
> must be a leak I'm missing somewhere...
>
> Ron
_______________________________________________
Support Team.Net http://www.team.net/donate.html
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/spridgets
|