Dave,
RH is AHA7414
LH is AHA7415
Fits H-AN8 38829 to 64734 Sprites
and G-AN3 25788 to 52389 Midgets
...and I don't have one. (except on my car)
Maybe the part numbers will help.
Peter C
======
At 03:19 PM 5/7/2008, Dave G. wrote:
>HELP Requested!!
>
>I am missing an interior molding from my beast which was made '65(?)
>during the changeover from the MKII Sprite to the MKIII Sprite.
>
>As far as I can tell, it was dropped from later MKII's but was used om the
>MKII's
>
>It is the curved piece of moulding that sits betweem the right side cockpit
>moulding and the post for the passenger side door. About 4" long and is
>shaped like abot 1/4 of a circle.
>
>It is not listed in the Moss, Anglo-Parts or BritVic catalogues
>
>I found pictures of it in Horlers book "Original Sprite and MIdget"
>In the top picture on page 56 it's at the top of the photo, to the
>right of the
>door jamb. just above the tube where the hood frame pieces go.
>
>On page 79, top picture, it can be seen at the middle bottom - it curves
>from the cockpit finisher to what would have been the "B" post on a Bug-
>eye...
>
>Does any one have this piece in useable condition that they would part
>with???
>Please let me know....
>
>--
>Dave G. KK7SS
>'65 MK III Sprite in Richland, WA
>"Real stupidity beats artificial intelligence every time."
> Terry Pratchett, 'Hogfather'
_______________________________________________
Support Team.Net http://www.team.net/donate.html
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/spridgets
|