Norm 2Bs wrote:
> The Turner's has the following dimensions:
> Total spread of 30".
> Main straight of c. 24"
> Each side arm is c. 4"
> Bend from front to sides is approx. 62-degrees, leaving c. 28-degrees from
> sides to mounting flange.
> Approx 5" front to back - front of middle section of bar to centerline of
> hole in flange for link bolt.
Norm
Sounds like you just described a Sprite Sway bar.
Total width 30"
Main straight 24"
Each first bend 4"
5" from c of bend to c of mounting hole
It has 2 bends on the sides, I did not check those as it's dark and my
square is in the truck tool box. But they look to be 60/30 + or -
Spridget sway bars are 9/16".
I have one
--
Frank Clarici
Toms River, NJ
_______________________________________________
Support Team.Net http://www.team.net/donate.html
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/spridgets
|