--===============1379535010==
Content-Type: text/plain; charset=windows-1250; format=flowed
Content-Transfer-Encoding: 7bit
Well I changed out the shock, no change.
Then I changed out the top trunnion and pin, no change
So I am changing out the lower A arm, and in removing the old A arm, if
you look real hard and stare real close at it, it may, have the
slightest tweak near the king pin on one side.
Did I say slight? But I got as far as getting the new arm in place and
the bushing in, I even kicked in the spring but tomorrow is another day
so I'll bolt it all up tomorrow and probably have the same issue.
If so, I take a port-o-power to the shock towers and pump and pump, and
pump until something bends.It's not bent now but it's gonna GET BENT!
--
Frank Clarici
Toms River, NJ
--===============1379535010==
Content-Type: text/plain; charset="us-ascii"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
Content-Disposition: inline
_______________________________________________
Support Team.Net http://www.team.net/donate.html
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/spridgets
--===============1379535010==--
|