Re: [Spridgets] Welder, Ablolutely Green but I got one

[Billy Zoom <billyzoom@billyzoom.com>]

It takes lots of practice. I think probably the hardest part is learning to
look at the puddle rather than the spark. Don't be afraid to experiment with
the settings. The recommended settings are very general, and sometimes
cranking the heat and moving faster works better, and vice versa. Get a lot
of scrap to practice on, and use the rusty bits you cut out. It's a very
different metal from the new panels.
BZ
_______________________________________________
Support Team.Net  http://www.team.net/donate.html


http://www.team.net/archive

http://autox.team.net/mailman/listinfo/spridgets