Not too worried about going numb. Just wanted to know how much trouble to
get the upper bolt out.
Mike MacLean
60 Sprite
56 BN2
Phil Nase
> Hi Mike,
> I did it on my Bugeye but you're right it's real close so you can't get
> much
> of a turn on the wrench. When your hands go numb from holding them over
> your head, take a break;)
>
>
> Phil Nase
> Quakertown, PA
> http://home.comcast.net/~philnasecpa
>
>
> Anybody had to replace the slave cylinder on Paul's 5 speed conversion
> with
> the engine and trans in the car? I have a leak in this area of my Bugeye
> of
> fresh brake fluid. It may or may not be the slave cylinder.
> Might just be the line going in or the bleed extension I installed to aid
> bleeding. If it is the slave cylinder it looks like the upper 9/16ths
> bolt
> holding the slave is very close to the frame rail. Anyone done this?
> Mike MacLean
> 60 Sprite
> 56 BN2
_______________________________________________
Edit your replies
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/spridgets
|