Hi Gang,
David had it right. It had to do with the shutter of the XR700 and now that
I corrected it, it is running fine! The shutter was actually not centered
on the shaft and was going through an oblong ort of pattern.
Thanks everyone for all of the excellent help and ideas.
Cheers,
Mike
----- Original Message -----
From: "David Lieb" <dbl@chicagolandmgclub.com>
To: "MICHAEL CARPENTER" <MAIL4CARPENTERS@peoplepc.com>; "Spridgets"
<spridgets@autox.team.net>
Sent: Tuesday, July 03, 2007 11:38 PM
Subject: Re: [Spridgets] Miss that is killing me
>> The photo optic shutter of the crane XR700 has to fire on number one if
>> it is
>> firing on 2,3, and 4. It is a simple mechanism.
>
> I do not know that this is a valid conclusion. Isn't there a separate slit
> for
> each cylinder? These have been known to rub on the "eye" and wear funny.
> Likewise, a little debris in the right slot would do this. Pull that
> shutter and
> inspect it. I seem to recall that it can be put back on 90* rotated to see
> if
> that moves the problem to another cylinder, but it has been a long time
> since
> I have looked at one of these and I could be mistaken. Got a 25D to put in
> as a test?
> David Lieb
_______________________________________________
Edit your replies
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/spridgets
|