spridgets
[Top] [All Lists]

Re: [Spridgets] New Genny problem

To: "Linda Grunthaner" <grunthaner@gmail.com>, "Frank Clarici"
Subject: Re: [Spridgets] New Genny problem
From: "Jack Laird" <jlaird237@cox.net>
Date: Sun, 10 Jun 2007 17:08:33 -0500
Belt is prob stuck under the dampner. hehe.

----- Original Message ----- 
From: "Linda Grunthaner" <grunthaner@gmail.com>
To: "Frank Clarici" <spritenut@comcast.net>
Cc: "Spridgets" <spridgets@autox.team.net>
Sent: Sunday, June 10, 2007 3:48 PM
Subject: [Spridgets] New Genny problem


> Frank & List,
> I finally installed my new generator (the kind with the threads for a tach
> drive unit) on my 62 Sprite 12cc motor I  tightened the bolts and the fan
> belt appeared tight. When I started her up I saw a puff of smoke turned 
> the
> engine off but do not know where the smoke came from. Then I started it
> again no smoke but I don't see the fan blade turning. I turned off the 
> motor
> and checked the belt and now it is loose. The generator was reconditioned 
> at
> my local auto electric shop several months ago. Did I over tighten and 
> burn
> it up? Why wouldn't the fan blade turn?
> Lin
>
> 62 California Sprite "Pinky"
> www.freewebs.com/lgrunthaner
> _______________________________________________
> jlaird237@cox.net
>
> Edit your replies
>
> http://www.team.net/archive
>
> http://autox.team.net/mailman/listinfo/spridgets
>
>
> -- 
> No virus found in this incoming message.
> Version: 7.5.472 / Virus Database: 269.8.13/842 - Release Date: 6/9/2007 
> 10:46 AM
_______________________________________________

Edit your replies

http://www.team.net/archive

http://autox.team.net/mailman/listinfo/spridgets

<Prev in Thread] Current Thread [Next in Thread>