You can not remove the front panel on a Midget/Sprite without removing the
fenders (wings). It is welded to the grill surround, bolted to the wings
with two screws & nuts at the top, three bolts and nuts at the bottom,
bolted to the frame rail uprights, bolted to the inner splash shields, and
bolted to the frame rails. WAY too much work.
David Riker
davriker@digitalpath.net
http://community.webshots.com/user/fool4mg
http://www.myspace.com/fool4mg
----- Original Message -----
From: <Daniel1312@aol.com>
To: <spridgets@autox.team.net>
Sent: Tuesday, February 13, 2007 12:45 PM
Subject: Engine and gearbox removal questions
> How much extra height do I 'save' if I remove the front panel and
> how
> easy is it to do this without disturbing the front wings?
|