Hello Lester,
most usually, its not just one side down, it'll be one corner
down... check to see if it (as is usual) the driver side rear
is low, but the passenger side front is (relatively) high?...
if so, swapping springs in the rear has provided NO cure.. ..
BUT..
i've had luck (my ONE spridget) putting spacers under the
spring pan of the high side front suspension A-arm.. this
necessitated longer bolts, but worked! lowering one front
corner raised the opposite rear corner!
YMMV
--
Best regards,
Bill mailto:pythias@pacifier.com
"66 Sprite
|