Hi Phil,
You're welcome to use my hydraulic press.
John
Fogelsville, PA
Phil Nase wrote:
> I only had a few minutes tonight so I decided to do something quick and
> easy. I have new lug bolt studs that are 3/8" but they won't seat all the
> way in the hub. They are really a tight fit. I had to use a torch to get
> the old ones out. Do I need to do the same putting in the new?
>
> I'm afraid of whacking them too hard because I don't want to screw up the
> hubs or ruin the splines. What's the procedure? Thanks.
>
> Phil Nase
> Awfull needy in
> Quakertown, PA
> http://home.comcast.net/~philnasecpa
|