I saw the result of this stuff over the weekend and I have to say it does a
GREAT job. Some (OK, all) of the stuff on that bugeye is really pitted, but
the axle looks really great. Same for the engine compartment. I will keep
that stuff in mind if I ever have to deal with that much pitting.
One other thing I don't really think Franks pictures show just how much
metal has been cut out and welded back into that car. It has to be close to
60%, maybe more.
Gilroy
On 11/24/06, Frank Clarici <spritenut@comcast.net> wrote:
>
> I just use some sprayable polyester resin type stuff called "Slick Sand".
> I sprayed the firewall, bonnet underside, and most of the engine
> compartment with this stuff.
> Sanded it down today and it turned my rust pitted pock marked metal into
> a slicker than monkey snot smooth finish.
> I even used this stuff on the rear axle banjo because it was all pitted.
> Not anymore. I painted the axle black and it looks better than new.
|