Mike Rivers wrote:
> Hitachi distributor conversion under the Tech section.
I tried the Hitachi dizzy, it is a simple replacement but on a Spridget
the dizzy cap with it's screw on set up is a pain.
It's too close to the body. It does work and you really don't have to
get to the dizzy cap all that often (unless you tinker like I do)
I also did the Izusu dizzy swap and it works much better with it's clip
on cap. Looks more correct too. I would recommend the Izusu over the
Hitachi.
--
Frank Clarici
Toms River, NJ
|