Hi Phil,
You wouldn't need to strip the paint. A good wiping with enamel reducer
would be prep enough. As long as there isn't any oil or dirt on the
surface the new paint should adhere just fine. Never had any peeling
that way.
When using the engine hoist, you won't damage the manifold stud threads
if you tighten the nuts first so there isn't any movement of the
bracket.
John
Fogelsville, PA
Phil Nase wrote:
>
>Once out I want to strip the current yellow paint off the block and
paint it
>the proper green. Any tips on stripping the paint?
>
>Phil Nase
|