Sorry, but always change your rubber Bob!
Old rubber will swell with use. (This is going from bad to worse)
Get a rebuld kit and start with all fresh parts, it will go together fine.
Regards,
Martyn
At 06:27 PM 28/07/2006 -0400, Bob wrote:
>With all the collective knowledge at the Buster Cluster, and running out of
>things to do, perhaps they, and anyone else, can give me some pointers on
>installing new rear cylinders. I can't seem to get the rubber boot and cyl
>through the hole. The cyls are new but the boot is old. Should I get new
>boots? What sequence do I use to make this go in and seat properly?
>Please, any help would be very much appreciated.
>Thanks
>Bob Campion
>Vernon, NY
|