Thanks all.. out to the 95 degree temps..
Lester
On Jul 15, 2006, at 11:25 AM, Rick Fisk wrote:
> Lester,
>
> That countersunk bolt secures the "distributor housing" to the
> block. Remove the bolt and distributor housing and the distributor
> driveshaft should come out easily.
>
> For whatever reason the distributor housing isn't mentioned in most
> manuals, but it is listed in the parts manuals.
>
> Rick
>
> ----- Original Message ----- From: "Lester Ewing"
> <lewing@sport.rr.com>
> To: "Frank Clarici" <spritenut@comcast.net>
> Cc: "Spridget List" <spridgets@autox.team.net>
> Sent: Saturday, July 15, 2006 12:08 PM
> Subject: Re: Dizzy help..
>
>
>> .. even more info.. after looking at the manuals I have, this
>> bolt under the dizzy clamp does not show anywhere. This is a
>> bolt in a counter sunk hole.. any ideas?
>>
>> Lester
|