spridgets
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

RE: Hardtop Bolts

from [Unknown] [Permanent Link][Original]
To: "Wm. Severin Thompson" <wsthompson@thicko.com>, "David Lieb" <dbl@chicagolandmgclub.com>, "Spridget List" <spridgets@autox.team.net>
Subject: RE: Hardtop Bolts
Date: Mon, 9 Jan 2006 15:57:52 -0500
Domainkey-signature: a=rsa-sha1; q=dns; c=nofws; s=dk20050327; d=earthlink.net; b=I8km+a5GOkzBwjJArlFVwM+Qy+lHiYEl+AwciqRy74JL8kkOWUEM7xXAd2cPHu66; h=Received:Message-ID:X-Priority:Reply-To:X-Mailer:From:To:Subject:Date:MIME-Version:Content-type:X-ELNK-Trace:X-Originating-IP; 
note taken , will check list at year's end ta see if you've been naughty or
nice!  ;)

chuck.


> [Original Message]
> From: Wm. Severin Thompson <wsthompson@thicko.com>
> To: David Lieb <dbl@chicagolandmgclub.com>; Spridget List
<spridgets@autox.team.net>
> Date: 01/09/2006 2:11:06 PM
> Subject: RE: Hardtop Bolts
>
> Yep, sorry... first mistake I've made in 2006... make note of it.
>
> -----Original Message-----
> From: David Lieb [mailto:dbl@chicagolandmgclub.com] 
> Sent: Monday, January 09, 2006 1:08 PM
> To: Wm. Severin Thompson; Spridget List
> Subject: Re: Hardtop Bolts
>
> > It's gotta be 4" x 5 1/6 ths fine
>
> I trust you mean 4 x 5/16" fine?
[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
Previous by Date:  Re: steering shaft end play, Unknown
Next by Date:  Great day, Unknown
Previous by Thread:  Re: Hardtop Bolts, Unknown
Next by Thread:  Re: Hardtop Bolts, Unknown
Indexes:  [Date] [Thread] [Top] [All Lists]