Re: HS6 Carb Needle Problem, Can't get them out! Got them out

spridgets

Re: HS6 Carb Needle Problem, Can't get them out! Got them out

To:	<triumphs@autox.team.net>, "Spridgets" <spridgets@autox.team.net>
Subject:	Re: HS6 Carb Needle Problem, Can't get them out! Got them out
Date:	Fri, 5 Aug 2005 10:01:58 -0500
References:	<006501c59956$ebd6d790$0400a8c0@Dell4600> <6.2.3.4.2.20050805093937.04f9de88@mail.theinter.com>

Thanks everybody,

I finally got the needles out last night.  I put the needle in a vice and was
able to tap them in and out with a plastic mallet.  I put a little PB Blaster
in the hole which seemed to help some.

Mark

Nashville

[More with this subject...]

<Prev in Thread]	Current Thread	[Next in Thread>
Re: HS6 Carb Needle Problem, Can't get them out! Got them out, Unknown <=

Previous by Date:	Re: HS6 Carb Needle Problem, Can't get them out!, Unknown
Next by Date:	45D4 Base Plate, Unknown
Previous by Thread:	Re: 350 small block Sprite, Unknown
Next by Thread:	45D4 Base Plate, Unknown
Indexes:	[Date] [Thread] [Top] [All Lists]