John,
I'm not sure exactly what product you are talking about, but I have tried
a Locktite "bearing retaining" liquid. Did no good whatsoever in my
case. However, the bearings were pretty loose, not on the grade of
interference fit, I suppose.
David
PS. Get your motor problems solved? The Mitty is calling!
On Tue, 22 Mar 2005 09:07:09 -0600 "Deikis, John"
<John.Deikis@med.va.gov> writes:
> Would this be an appropriate place to try one of the "high fill"
> anerobic
> adhesives, like a Loctite or Permatex "Shaft and Bearing Mount"?
> (claims to
> make press fits into interference fits).
> JohnD
>
>
> Date: Mon, 21 Mar 2005 06:25:53 -0600
> From: dmeadow@juno.com
> Subject: Re: Whyisit - Rear hubs leaking
>
> Mike,
>
> Loose bearings could very well be your problem.
|