But I have two 3/4" bore masters that have 7/8 cast into the side! Not
resleeved either. Are they all like this?
Rick
----- Original Message -----
From "Dan Gillitzer" <dang at ticon.net>
To: "Kid Vid" <kidjoevid@yahoo.com>; <spridgets@autox.team.net>
Sent: Sunday, March 06, 2005 8:21 PM
Subject: Re: Master Cyl Bore
> Bore was decreased in size to 3/4" starting with the Mk3 Sprite/Mk2
Midget,
> Prior to this is was 7/8"
> Dan
> ----- Original Message -----
> From: "Kid Vid" <kidjoevid@yahoo.com>
> To: <spridgets@autox.team.net>
> Sent: Sunday, March 06, 2005 6:54 PM
> Subject: Master Cyl Bore
>
>
> > Thanks for the advise RE the bore size and rebuild kit
> > on my Sprite. I ordered a kit for a 62' 948 Sprite,
> > which should have had a 7/8" bore per the catalogs. A
> > caliper shows I really have a 3/4" bore master
> > cylinder. My Sprite is a HAN6L-17479...so I thought
> > the fact I have a 948 would mean a master cylinder
> > with a 7/8" bore. Maybe it's a half year thing or
> > something? Any comments are welcome!
> >
> > Joe Lansing
> > 62 Sprite MKII
--
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.300 / Virus Database: 266.6.0 - Release Date: 03/02/05
|