spridgets
[Top] [All Lists]

Re: Radiator paint

To: <Spridgets@autox.team.net>
Subject: Re: Radiator paint
Date: Wed, 30 Jun 2004 22:46:18 -0500
References: <00a501c45f08$40232a40$6401a8c0@DELLNOTEBOOK> <40E374C6.2040308@exit109.com> <004501c45f13$dc526060$6501a8c0@refisk>
My off road buddies swear by a product called Slip plate #1  it is a
graphite paint.  They paint all their leaf springs with it.  Seems to work
well with them...might be woth looking at.  I have some in the garge just
havn't used it yet.
www.slipplate.com

Charlie
1959 Sprite
----- Original Message ----- 
From "Rick Fisk" <refisk at chartermi.net>
To: <Spridgets@autox.team.net>
Sent: Wednesday, June 30, 2004 9:33 PM
Subject: Re: Radiator paint


> Ok then, what about 1/4 elliptic rear springs?  They have been torn down
and
> cleaned, new bottom leaves with new bushings installed, new mounting
bolts,
> etc. and are ready to reinstall.  Should I paint them before assembly and
> then put grease between the leaves or just leave the metal bare?






<Prev in Thread] Current Thread [Next in Thread>