spridgets
[Top] [All Lists]

Re: Fuse box failure?

Subject: Re: Fuse box failure?
Date: Tue, 29 Jun 2004 06:00:46 -0500
Cc: SDOliner@aol.com, spridgets@autox.team.net
References: <d1.1032dd6a.2e12404d@aol.com>
The contacting springs on the fuse may have some corrosion on them. I have had 
that
happen before, wiggle the fuse, and all is well.

SDOliner@aol.com wrote:

> In a message dated 6/28/2004 8:32:45 PM Eastern Standard Time,
> robert.g.cummins@ua.edu writes:
> Any ideas?
> No power at the "power side" of the fuse. See if you have power out at the
> brake switch. "power in" and then "power out" if you understand what I am 
>trying
> to say.
>
> no power at the "power out" side of the fuse, clean the connections, check
> the fuse. I have never heard of a fuse box failure. Not a lot in there to 
>break.
>
> David Oliner






<Prev in Thread] Current Thread [Next in Thread>