To: | "Spridgets" <spridgets@autox.team.net> |
---|---|
Subject: | Re: valve lash |
Date: | Fri, 16 Apr 2004 07:20:53 -0500 |
References: | <000001c4239e$653b3340$0400a8c0@willy6fz8y3m4d> <003201c423a1$51fc1bc0$3800000a@kencomp.net> |
> Normal is 0.012, cold with standard cam > If it is a "hot" cam then 0.016 That, of course, assumes the standard 1.3:1 rocker arms. Since what you are really trying to adjust is the vertical free motion on the pushrod side (rather hard to measure), the clearance on the valve side will be different if you have the 1.5:1 rocker arms. David Lieb |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | Re: valve lash, Unknown |
---|---|
Next by Date: | Re: valve lash, Unknown |
Previous by Thread: | Re: valve lash, Unknown |
Next by Thread: | Re: valve lash, Unknown |
Indexes: | [Date] [Thread] [Top] [All Lists] |