Sometimes you need a third guy to steer it out, esp in a 1500, where the
front sheetmetal doesn't unbolt!
http://home.comcast.net/~kvcbk/engine2.jpg
-=Chris
<-----Original Message----->
From: Frank Clarici
Sent: 4/1/2004 10:19:23 PM
To: doakie@sbcglobal.net
Cc: spridgets@autox.team.net
Subject: Re: Engine/Gearbox Removal
Robert Doak wrote:
..
> My question is, how feasible is it for one person, unassisted,
> to remove and replace the engine and gearbox?
I used to do it all the time, then I got old ;)
I would stand on the shocks and just physically yank it up and out.
Now I have a hoist but you can use a rope over a branch.
2 guys and a 4x4 with a rope works too. Right guys?
We have done this a few times, when we're in a hurry.
|