spridgets
[Top] [All Lists]

RE: Compression Question & Calculating Camber Volume

To: "'Frank Clarici'" <spritenut@exit109.com>
Subject: RE: Compression Question & Calculating Camber Volume
Date: Wed, 17 Mar 2004 22:29:23 -0500
Cc: spridgets@autox.team.net
Frank Clarici wrote:

I also found the VP7 just a bit too much for the street. I was fouling 
plugs way too fast. But there are way toooooooo many traffic lights in 
this town.
__________________________________

I've been running my VP7 now for ~7 years, both in traffic and on the open
road.  I'd consider it to be pretty tame...  Idle is even and plugs stay
relatively clean with stock head and NGK BP7 plugs, I am running the hotter
Lucas sports coil and keep the idle and low rpm mixture a little on the lean
side.  I was actually thinking about going to an SVP3 cam for the street,
but don't want to pull the motor if I happen to knock out one of the cam
bearings...

Anyone have any info on stock piston sizes for 1275's?






<Prev in Thread] Current Thread [Next in Thread>