Greetings all:
If you have a moment, would you mind looking at a picture of a Sprite Leaf
spring at: http://www.geocities.com/thcmtu/ to see if it is assembled
correctly? The bushing can go in the spring "eye" on either end, but the
distance from the eyes to the through bolt is different. Since the through
bolt marks the center of the axle I want to make sure things are correctly
assembled. In the picture, the bushing is on the left (short) side and the
rubbers are on the right (long) side of the spring as pictured. In other
words the long end of the spring mounts to the rear of the car. Correct?
Tim
|