As a woodworker by trade, I recommend NOT using Oak, or any other hardwood for
that
matter. You would be better served to find a nice piece of 13 ply and make it
out of
that.
RBHouston@aol.com wrote:
> I won't know until I receive them and try it, but my plan is to use a good
> piece of oak, probably 2x6, and drill/cut/router out an opening the shape and
> size of the spinner, and then neck down the ends to handle size and use this
>to
> "torque" on the spinners.
>
> I think this will work. I'll let everyone know after I try.
>
> I remember my 65 and 68 Midgets both had buggered up ears from the copper
> Thor hammer that came with the car. I looked at Fisher Jones for some eared
> replacements for my octogon nuts a couple of years ago, but all the old ones
>were
> buggered and needed rechroming.
|