If I recall correctly, one of the main differences between the kits is the
clutch. MorrisService uses a standard Datsun clutch, and the Rivergate uses
a modified/custom clutch. So, with the Morrisservice you will need to have
your flywheel modified, but with Rivergate you don't need to modify your
flywheel yet you will need to buy clutch replacements from them or have your
local performance shop make up one for you. I'm sure there are other
differences as well, but this was the largest that I noticed.
Ok, Cap'n. Where are you located? I thought you were in California for some
reason.
On Friday 30 January 2004 08:23 am, Robert E. Shlafer wrote:
> Sure, David...
>
> There are two Datsun 5 speed conversions
>
> 1.Morriservice (Paul A)
> 2.Rivergate (Bill Perry)
>
> There are minor differences. Paul A.
> is on the midgetsprite list also and is out
> in the Northwest. Rivergate hails from
> Tennessee which is closest to me so
> I ordered from Rivergate considering
> shipping costs. If Morrisservice had been
> closer I would have ordered from Paul.
>
> Both of these kits cost the same and have been perfected over the years
> for easiest
> installation.
>
> What is it you specifically want to know?
>
>
>
>
> Cap'n. Bob
> '60 :{)
|