Don't forget to remove the bearing from the hub first.
Dan Walters
'63 Sprite
'74 Midget
Brick NJ
-----Original Message-----
From owner-spridgets at autox.team.net
[mailto:owner-spridgets@autox.team.net] On Behalf Of PAsgeirsson
Sent: Monday, September 08, 2003 10:37 PM
To: 66Sprite; spridgets@autox.team.net
Subject: Re: How to remove the Rear bearing oil seal?
Clamp hub in vice, take screwdriver and hammer, try to catch the seal
with the blade as you pound it out.
Usually works!
Paul A
----- Original Message -----
From "66Sprite" <66sprite at backyardwildlife.com>
Subject: How to remove the Rear bearing oil seal?
> Anyone got some tips for removing the rear bearing
> seal.
>
> I've got the hub and bearing off, but can't quite
> figure out how to get that seal out of there.
>
> TIA,
>
> eugene
> --
> 66 Sprite
> Fort Worth, TX
---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.515 / Virus Database: 313 - Release Date: 9/1/2003
/// unsubscribe/change address requests to majordomo@autox.team.net or try
/// http://www.team.net/mailman/listinfo
/// Archives at http://www.team.net/archive
|