Hello Sam,
thanx, but i'm missing the contact that goes inside that limit
switch. and the little clippy thingy to hold it on.... working
on a solution to that.... but THANX!
SM> Bill;
SM> You loosen the small hex head machine screws on the upper plate of the
SM> wiper motor and turn the dome shaped cover with the red wire soldered
SM> to it.
SM> Keep turning it slightly until the wipers park. It's tricky and time
SM> consuming but you can get it to work.
SM> Sam
--
Best regards,
Bill mailto:pythias@pacifier.com
/// unsubscribe/change address requests to majordomo@autox.team.net or try
/// http://www.team.net/mailman/listinfo
/// Archives at http://www.team.net/archive/spridgets
|