I went out to the garage and measured all my car's clamps and came up with
this:
74 Midget Rostyle wheel 5 1/4"
74 MGB Rostyle wheel 6 3/8"
68 MGB wire wheel 7"
Don't have a wire wheeled Midget (yet).
All 3/8" X 24 thread
When I put the 165 70's on the Midget, I had the same problem. I put a
thread connector (looks like a long hex nut) on the end of the clamp and cut
the head off of a bolt to screw in the other side. Screwed them both in and
out 'till I found the right length and spot welded them together. Kinda
crude, but works for me.
Jim K.
Does anyone know if the wire
> wheel clamp for the MGB is:
>
> A: longer and if so by how much?
>
> B: the same thread.
>
> Thanks
>
> Daniel1312
/// unsubscribe/change address requests to majordomo@autox.team.net or try
/// http://www.team.net/mailman/listinfo
/// Archives at http://www.team.net/archive/spridgets
|