The old standby is fitting a zerk and using your grease gun.
Bill McLeod
Slightly Classics
Chris King wrote:
>2 calipers, 4 pistons. Only 1 came out under 90 psi air pressure. 3 others
>moved, but are still stuck in the bores. Of the 3, 2 I can probably whack out
>with a tool inserted in the banjo connection hole.
>
>Any good ways to get the last one out? I'm replacing all 4, since they're only
>about $10 each, so destructive methods (to the pistons) are also welcome.
>
>-=Chris
>
>Chris King - cbking@alum.rpi.edu
>http://mywebpages.comcast.net/kvcbk/
/// unsubscribe/change address requests to majordomo@autox.team.net or try
/// http://www.team.net/mailman/listinfo
/// Archives at http://www.team.net/archive/spridgets
|